This kit gets you from the rear of your car to the front, allowing you to use AN-6 / JIC fittings
Comes with a feed and return pipe.
Helps simplify choosing the parts needed for your fuel system.
Typically used on injection cars.
All kit components are available to buy individually.
Grey mounting brackets require a 7.8mm hole to be drilled and the bracket will simply click into this hole. These clips are best suited where the metal is double skinned or more i.e the side of the chassis rails. These brackets will leave a gap of approximately 2mm between the hard lines.
White mounting brackets are can be fixed using a self tapping screw or a pop rivet. These brackets will leave a gap of 14mm between the hard lines.
