Mk1 Cortina Aluminium Front Hubs – 2.25in Coilovers & M16 Vented Discs (CS098*G)

Pair of CNC-machined HE30 aluminium front hubs for Mk1 Cortinas fitted with Retroford CS028 front struts or standard front struts converted to 2.25-inch coil-over springs. Designed for use with M16 vented front discs. The wheel-mounting face is offset 10 mm outwards and the brake-disc mounting face is offset 5 mm inwards compared with a standard Cortina hub.

Fitment

• Mk1 Cortina with Retroford CS028 front struts and M16 vented front discs.
• Mk1 Cortina with standard Mk1 Cortina front struts converted to 2.25-inch coil-over springs and M16 vented front discs.
• Can be used with the original steering box or Retroford rack-and-pinion conversion when fitted with one of the above strut and brake arrangements.

Specification

• Quantity: 2 aluminium front hubs (one pair).
• Material: CNC-machined HE30 aluminium.
• Wheel bearings: standard Ford bearing dimensions.
• Wheel studs: standard-type stud fittings.
• Wheel-mounting face: +10 mm offset compared with standard.
• Brake-disc mounting face: -5 mm offset compared with standard.

Brake Compatibility

• For M16 vented front disc installations, including the Retroford CB001V*COMP front brake kit with the struts specified above.

Important Fitting Information

The +10 mm wheel offset gives more room between the tyre and a 2.25-inch coil-over spring, but also moves the wheel further outwards. Check tyre-to-spring and wheel-to-arch clearance.

Check disc-to-spring and caliper clearance, bearing seating and wheel-stud engagement during installation. Bearings, studs and brake components are not listed as supplied with this hub pair.