Search the Retroford Shop   

New and Featured Products

MK1/MK2 Escort RS OE Spec Front Struts - Pair (SS072)

MK1/MK2 Escort RS OE Spec Front Struts – Pair (SS072)

£215.00 exc. VAT

Available on back-order
Add to basket
MK1/MK2 Cortina Duratec to Type 9 Two Piece Prop Shaft - Steering Rack (T9-012DSR)

MK1/MK2 Cortina Duratec to Type 9 Two Piece Prop Shaft – Steering Rack (T9-012DSR)

£459.27 exc. VAT

Available on back-order
Add to basket
MK1/MK2 Cortina Duratec to Mazda MX5 N7 Two Piece Prop Shaft - Steering Rack (MX5-044)

MK1/MK2 Cortina Duratec to Mazda MX5 N7 Two Piece Prop Shaft – Steering Rack (MX5-044)

£459.27 exc. VAT

Available on back-order
Add to basket
Zetec Prop Shaft (Z042)

MK1/MK2 Escort Zetec to MX5 N7 Prop Shaft (MX5-046)

£295.86 exc. VAT

In Stock and available for dispatch
Add to basket
Duratec / MZR 164mm Trigger Wheel Crankshaft Pulley (D069)

Duratec / MZR 164mm Trigger Wheel Crankshaft Pulley (D069)

£78.99 exc. VAT

In Stock and available for dispatch
Add to basket
New
Genuine Ford Front Ball Joint Dust Seal (SS071)

Genuine Ford Front Ball Joint Dust Seal (SS071)

£4.88 exc. VAT

In Stock and available for dispatch
Add to basket
New
Cam Belt Tensioner Gauge (M091)

Cam Belt Tensioner Gauge (M091)

£41.32 exc. VAT

In Stock and available for dispatch
Add to basket
New
Zetec Black Top Water Pump Housing Gasket (Z158)

Zetec Black Top Water Pump Housing Gasket (Z158)

£18.00 exc. VAT

In Stock and available for dispatch
Add to basket
New
Zetec Lightweight RWD Flywheel (4.6kg) (Z156)

Zetec Lightweight RWD Flywheel (4.6kg) (Z156)

£270.00 exc. VAT

In Stock and available for dispatch
Add to basket
New
Bush Insertion and Removal Tool - TCA, 4 Link and Anti Tramp Bar Bushes (M066)

Bush Insertion and Removal Tool – TCA, 4 Link and Anti Tramp Bar Bushes (M066)

£19.80 exc. VAT

In Stock and available for dispatch
Add to basket
New
Ford Xflow & Pre-Xflow 10-Tooth Starter Motor – 3-Hole Fixing (SM002)

Ford Xflow & Pre-Xflow 10-Tooth Starter Motor – 3-Hole Fixing (SM002)

£129.79 exc. VAT

In Stock and available for dispatch
Add to basket
New
Ford Xflow & Pre-Xflow 9-Tooth Starter Motor – 2-Hole Fixing (SM001)

Ford Xflow & Pre-Xflow 9-Tooth Starter Motor – 2-Hole Fixing (SM001)

£129.79 exc. VAT

In Stock and available for dispatch
Add to basket
New
MK1 & MK2 Escort X-Flow / BDA World Cup Engine Mounts (Pair) (XF006)

MK1 & MK2 Escort X-Flow / BDA World Cup Engine Mounts (Pair) (XF006)

£104.37 exc. VAT

In Stock and available for dispatch
Add to basket
New
MK1 Escort Rix Engineering Group 4 Throttle Pedal (RX245)

MK1 Escort Rix Engineering Group 4 Throttle Pedal (RX245)

£46.50 exc. VAT

In Stock and available for dispatch
Add to basket
New
MK1 Escort Rix Engineering Group 4 Bias Pedal Box - Hydraulic Clutch (RX247)

MK1 Escort Rix Engineering Group 4 Bias Pedal Box – Hydraulic Clutch (RX247)

£495.00 exc. VAT

In Stock and available for dispatch
Add to basket

Latest from Retroford on Youtube

This week at RetroFord, it’s all about new technology. We’ve been busy 3D printing prototypes for some new products, and we’ve finally fired up our new xTool laser cutter – so we’ll show you it in action and what we’re planning to use it for. We also give you a bit of an insight into how we now package our engines, following a few issues with engines being damaged in transit. And finally, we take a look at some of our ultra-short-body front struts for Mk1 & Mk2 Escorts and Capris.
Friday Round Up: New Tech at RetroFord! 3D Printing, Laser Cutting & More
You know what time of the week it is… it’s Friday Roundup time! This week we talk about the ongoing battle to get a UK logbook for our French Mk1 Cortina, give you a behind-the-scenes look at how our Mk1 & Mk2 Cortina bias pedal boxes are made, and finally give you a first glimpse at our new in-house laser cutter. Plenty going on at RetroFord as usual! 👍 Like the video if you enjoy the Friday Roundups 💬 Let us know your thoughts in the comments 🔔 Subscribe to keep up with what we’re working on
Friday Round Up: The Fight to Get Our French Mk1 Cortina UK Registered!
After a couple of weeks off, Friday Roundup is back — and there’s plenty going on at RetroFord! This week we take a look at some of the drop-forged steering components that we’re having manufactured for Classic Fords. We’ve also got an update on our Mk2 Cortina fuel tanks and engine mounts, and finally, we’ve decided what wheels we’re putting on the Escort this week!
Friday Round Up: We've Finally Chosen the Wheel for the MK1 Escort!
Retroford is now 3D printing products! 👀 This week we take a look behind the scenes at some of the latest product development going on here at Retroford, including prototype oil pickups and a new Zetec DCOE inlet manifold. We get the lowdown on how these new parts are being designed, prototyped and developed in-house — and what could be coming next. Another busy week at Retroford!
Friday Round Up: Retroford is now 3D printing products!