Mk1 Cortina Aluminium Front Hubs – Rack & Pinion, M16 Vented Discs (CS098*G)

Pair of CNC-machined HE30 aluminium front hubs for Mk1 Cortinas converted to Retroford rack-and-pinion steering. For use with M16 vented front discs and either Retroford CS028 front struts or standard Mk1 Cortina front struts converted to 2.25-inch coil-over springs. The wheel-mounting face is positioned 10 mm further outwards and the brake-disc mounting face 5 mm inwards compared with a standard Cortina hub.

Fitment

• Mk1 Cortina with Retroford rack-and-pinion steering conversion.
• Front struts: Retroford CS028 2.25-inch front struts or standard Mk1 Cortina front struts converted to 2.25-inch coil-over springs.
• Brakes: M16 vented front discs, including the Retroford CB001V*COMP M16 vented front brake kit.

Specification

• Supplied quantity: two aluminium front hubs (one pair).
• Construction: CNC-machined HE30 aluminium.
• Wheel bearings: standard Ford bearing dimensions.
• Wheel studs: standard-type stud fittings.
• Wheel-mounting face: +10 mm compared with the standard hub.
• Brake-disc mounting face: -5 mm compared with the standard hub.

Important Fitting Information

• The separate wheel and brake-disc offsets provide clearance for the specified vented-disc and 2.25-inch coil-over strut arrangement.
• Check clearance between the brake disc, caliper and coil-over spring, and between the tyre and wheel arch.
• Check wheel-stud engagement and correct wheel-bearing seating before use.
• Bearings, wheel studs, brake components and fitting hardware are not specified as included with the hubs.