This kit allows you to adjust the ride height when using standard type coil springs so that you can keep your standard strut top mount and standard cup.
Ideal for road cars as the use of larger springs gives a more gentle and compliant ride, over the 2.25″ springs.
This kit allows you to lower your car by approximately 2″ using standard springs (Please see the attached photo as lowering below this on a standard spring will mean the lower platform can rub on the tyre).
This kit allows for the fine-tuning of your ride height with aftermarket springs.
Typically using Retroford springs, you can adjust the ride height from 1 to 3 inches. Please see the suitable springs above.
For cars wanting to be lowered by more than 2″ please see our additional springs available in a variety of uprated poundages here
These should only be welded on the bottom part of the threaded tube. The top part of the threaded tube does not need to be welded as this could deform and destroy the strut body thread.
MK1/2 Escort RS2000 (Including Bilsteins)
Note: NOT suitable for MK1/2 Escorts with standard struts